Xtreme4vs-1U

Description

4vs-videowall-controller-2

  • The EMS Xtreme4vs-1U is a stand alone 19" chassis mount display wall controller that accepts a single-link 1920x1080(DVI-D or HDMI) or dual-link DVI input up to 4K x 4K and can flexibly display this across four output monitors.Each output can be driven as DVI or analog RGB and can represent an arbitrary crop region of the original input image.  The output resolution and frame rate does not need to be related to that of the input as the Xtreme4vs will optionally upscale and frame rate convert each cropped region independently.  Additionally, each output can be independently mirrored or rotated through 90°, 180° or 270° to support creative mixes of landscape and portrait monitors.

    • Supports full bezel width and height correction for all types of displays.

    • Ideal for use with edge blending projectors - supports image overlapping.

    • Splits a single DVI input into four independent monitor outputs.

    • Accepts Dual Link DVI, Single Link DVI or HDMI* input.  (*HDMI input requires the optional DVI/HDMI Adapter.)

    • The input EDID is programmable to allow arbitrary input resolutions and frame rates.

    • Flexibly drives four displays, each from any selected region of the input image.

    • Supports both DVI and analog RGB output monitors.

    • Stand alone operation supports auto-detecting of input resolution and output monitor native resolutions.  Output screen configuration is defined by internal non-volatile memory.

    • Output configuration is programmable via a USB connection to a PC.  Graphical utility allows easy control of cropping, scaling, rotation and gaps.

    • Multiple units can be used for larger wall configurations.


    Supports creative monitor arrangementsEach output monitor can take its input from any region of the input DVI image, since all the required cropping, scaling, rotation and frame-rate conversion is handled by the Xtreme4vs hardware.  These regions can overlap to allow any output to replicate another, or they can be configured to support any creative splice of the source material.  This allows the support of many non-rectangular screen arrangements with uneven gaps, and any mix of monitor orientations.

    X4vswindmill.gif

    X4vswindmill-square.gif

    Crop the input signal into x4 and display x2 quarters landscape
    and x2 quarters portrait.

    Crop the input signal x4 rotate through 90º,180º or 270º, display in landscape and portrait.

    4vs 4

    Crop the input signal 1920x180 and display in landscape on to individual screens at 1280x1024 each.

     


  • Dual-Link DVI input supports high resolutions

    Dual-Link DVI input will support high resolution pixel-perfect source images for display.  The EMS Xtreme4vs can additionally present a default native resolution to the source to allow still higher custom resolutions at reduced frame rate, but still remain within the capabilities of the Dual-Link interface.  Most standard graphics card sources will output at this native resolution.  Since the Xtreme4vs will scale and frame-rate convert, using a triple-buffered capture architecture, the output monitors can still be driven at their preferred frame rates and resolutions.

    4vs-1uQuad-Split-final
    Easily Configurable

    The Xtreme4vs supports simple editing of custom input and output configurations via a USB connection to a PC.  Once configured, the Xtreme4vs will run stand-alone, without the need for the USB connection, and will auto detect input resolutions and adjust internal scaling appropriately to drive the output monitors in a consistent manner.

    Gen-Lock

    The Xtreme4vs will auto-sense input and output framerates and automatically genlock when possible.  Four identical monitors will automatically be driven genlocked and if the input timings match they are additionally genlocked and clock-locked to the source signal.


  •  Xtreme4vs Specification

    Physical Dimensions

    235 x175 x 44mm / 9.25" x 6.9" x 1.75"

    Operating Temperature Range

    0 - 35 DegC / 32 - 96 DegF

    Power Requirements

    5V DC, 11W.  Universal mains power adapter supplied (100-240V).

    Cooling

    Cooling by internal fan. The input/output vents should not be restricted.

    1x Dual link DVI capture

    To 330Mpixels/s.

    Input Surface

    4k x 4k maximum

    4x Single link DVI or analog RGB outputs

    To 165Mpixels/s.

    Output Screens Resolutions

    Up to 2.5Mpixel (maximum 2048 pixels in either direction

    Arbitrary Up Scaling

    64x original surface area

    Software Control

    Supports configuration and updates via USB port (USB 2.0)

     





    Other possible screen configurations:-

    Xtreme4vs-1uconf

     

    4vs-1u

     
  • Example client application Kuwait Super Market.




    Xtreme4vs with HD2DVI

    The example below demonstrates the use of our HD2DVI converter, if using HDMI (HDCP) the solution below will convert the HDMI to DVI and also provide a seperate audio output.
    The resulting DVI can now be used as an input to the Xtreme4vs with no HDCP thus allowing the Blu-Ray content to be displayed over the video wall.


     HD to DVI convertor
    For full description of the HDMI2DVI click here

  • Here you can download our Datasheets, Manuals, Application and Drivers 


     

    PDF

     tab

    Xtreme4vs Datasheet

    user manual

    tab

    Xtreme4vs User Manual

     

    tools
    tab

    Xtreme4vs videowall controller Applications Install

    SDK

    tab

    View the application areas

    View different areas of application in which EMS products have been integrated.

Share this product