Xtreme4fx, Wall Controller

Description

Xtreme4fx main

 

  • Xtreme4fx: Revolutionize Your Video Wall Display

     

    This next-generation multi-display controller Xtreme4fx offers four outputs and three inputs from a single box, leading to a myriad of possibilities for the end user.

    Among many exceptional features, the high performance EMS 4fx is capable of DisplayPort 1.2 capture at 4K/UHD at 60fps and HDMI 1.4 4K capture at 30fps. All inputs and outputs support HDCP content and can be programmed and controlled independently through either a local USB connection or the on-board network interface.

    Developed for true stand-alone operation, the non-volatile operation of the EMS 4fx can adapt to input changes by automatically adjusting all scale factors. The intuitive user interface allows customers to determine which input is used.

    The EMS 4fx is suitable for projects of all sizes. Featuring high bandwidth DisplayPort1.2 loop-through, any of the device’s inputs can be daisy chained to build video walls of the largest scale imaginable. With dual Ethernet port capability, only one EMS 4fx in the chain requires connection to the physical LAN as Ethernet loop-through is supported on the second port, meaning multiple devices can be connected. Despite the potential size of installations that can be created using the EMS 4fx, the company has engineered the device to offer its simplest installation to date.
    Ultimately, the EMS 4fx has been developed to meet increasing customer demand for design freedom in creating and deploying small, medium and large scale signage projects. Here, with the assistance of EMS’s Wall Designer software, even the most creative video walls can be produced with ease.
    This hugely popular multi-screen design tool has been updated specifically to incorporate the EMS 4fx.


    Network Connectivity
    The EMS Xtreme4Fx has dual ethernet ports to allow users to add the device to their networks. Only one EMS 4fx  in the chain requires connection to the physical LAN as ethernet loop through is supported on the second port, meaning multiple devices can be connected.

    Video Wall Designer Software
    The Video Wall Designer software allows users to add displays from the ever-expanding database of monitors. Users can also visualise their content by adding inputs, adjust display regions and instantly program all linked devices. With bezel correction, image rotation, cropping, scaling and mirroring options, as well as the ability to overlap or replicate any splice of the source material, there are limitless creative configurations.

    Output Features
    The outputs comprise a choice of four genlocked HDMI or DisplayPort HD 1080p connections. Each output monitor can take its input from any region of the input image as all of the required cropping, scaling, rotation and frame-rate conversion is handled by the EMS 4fx hardware. These regions can overlap to permit any output to replicate another, or can be configured to support any creative splice of the source material. This allows the support of many non-rectangular screen arrangements, as well as any mix of monitor orientations, permitting users to create an almost unlimited multi-monitor canvas.

                       

                                                                                          
    EMS Xtreme4fx Front      EMS Xtreme4fx Back

     

     

  •  Xtreme4fx Specification

    Dimensions 316x172x42mm (1.86kg)
    Operating Temperature
    0 - 35°C/ 32 - 96°F
    Power Requirements
    IEC switched and fused mains connectors 100-240V, 50/ 60Hz/ 35W
    Video Input Connections
    DisplayPort1.2 (2160p/ 60 or equivalent up to 616 MP/s) 2x HDMI1.4 (2160p/ 30 or equivalent up to 297 MP/s
    Video Output Connections
    HDMI version: 4 x HDMI1.4 (1080p/ 60 or equivalent up to 165 MP/s)
    DisplayPort version: 4 x DP1.1 (1080p/ 60 or equivalent up to 165 MP/s)
    Loop-through (both versions): DisplayPort1.2 (locked to selected video input resolution)
    Input Surface
    8k x 8k maximum
    Genlock Input
    Analogue black-burst on dedicated BNC connector. Any video input (HDMI1, HDMI2, DisplayPort)
    Control Interfaces
    Dual 100BaseT Ethernet ports with inbuilt managed switch. USB2.0 Type B connector (full speed operation)
    Firmware Support
    Updates supported via USB and Ethernet connection
    Storage -20 to 70°C
    Relative Humidity
    5% - 90% non-condensing
    Warranty 3 years

    We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.

     
     
     


    Other possible screen configurations:-


    1x4 demo

     

                              

        

     4x1 demo




    Xtreme4vsconf.gif




  • Here you can download our Datasheets, Manuals, Application and Drivers 


     

    PDF

     tab

    Xtreme4fx Datasheet

    Quick Start User Guide click here

    user manual

    tab

    Xtreme4fx User Manual

    toolsDownload Software

    Xtreme4fx Video Wall Designer Software 
    Application & Drivers

    SDK

    tab

    View the application areas

    View different areas of application in which EMS products have been integrated.





     

 

 

Share this product