The XtremeRGB-II is a stand-alone PCI-X plug in card, delivering extreme performance with 480M/Bs transfer bus bandwith
Half size 64 bit PCI Card.
Dual Channel real-time Analog VGA/RGB or DVI capture with high speed 500MB/s DMA transfer.
Capture resolutions up to 2048x1536 Analog or 1920x1080 DVI.
Support for interlace and non-interlace video sources.
On board processor providing auto-sync and capture mode detection.
32MB per channel DDR capture memory.
Software compatible with the XtremeRGB product range.
Includes WDM streaming drivers and the EMS XtremeRGB application software.
Fully integrated with the EMS wall controller software VigiControl for video wall applications.
XtremeRGB is also optimised for operation with the EMS range of graphics cards.
Support for multiple cards allowing up to 64 capture channels. (32 cards)
Support for Windows® XP/ Vista/ Server 2003/Server 2008/Windows® 7, and Linux
EMS SDK included or software developers including source code examples (also DirectShow source samples).
Number of inputs: 2
Simultanous Capture: Yes
Capture sources: 2x Direct DVI, or HDMI, VGA, Component via supplied adapters.
Max resolution: DVI/HDMI up to 1920x1200 24bit at 60Hz, VGA/RGB: 2048 x 1536 x 24bit
Multi-Card support: Yes
The XtremeRGB-II, a standalone PCI-X 64-bit PCIbus card, will also operate in 32-bit PCI with reduced performnace. This high industrial performance makes the XtremeRGB series ideal for a wide range of applications. The XtremeRGB-II has two capture channel supporting up to 1920x1080 DVI (1920x1200 with reduced blanking) or 2048x1536 VGA resolutions. The XtremeRGB-II captures the Analog/DVI data and triple buffers it into on-board storage. This data is then copied using Direct Memory Access (DMA) to the host system for display, storage or streaming. The included application includes option to either transfer video data direct to the graphics card thereby increasing performance or to transfer video data to the graphics card via system memory.
The XtremeRGB is supplied with a stand-alone software application, simply connect your external DVI or Analog source into the card, run the XtremeRGB application to automatically detect the video source format and display the captured video in a window on your desktop. For multiple inputs the application can be executed multiple times, each capture is displayed in its own independent desktop window. The captured video data is displayed in a desktop window with/without menu/borders, can be resized up/down, overlapped and/or maximized to full screen display.
The EMS application also enables you to configure the timing and format of the input sources as well as brightness, contrast, hue etc ...
For streaming applications EMS include WDM drivers, hence any Directshow compatible software can be used such as, Windows Media Encoder/Expression, VLC, Vidblaster, HDwave, Watchout, Adobe Connect etc ...
The XtemeRGB-II is an ideal solution for applications that require the capture of multiple DVI/HDMI/VGA or Component sources in real-time.
Software Development Kit (SDK) for developers/integrators
The XtremeRGB is supplied with a powerful SDK for own application development, many source code examples are included to help reduce the development time.
Also included are Directshow source code examples.