|
Tel: +44 (0) 116 2775730 |
|
|
|||||||||||||||||||||||
|
|
Product Description
Application AreasBroadcast, Adverising Monitering Applications ConnectionsThe XtremeRGB-Ex8 has two 26 Way D- type connectors. Either connector can be used to input video signals using a 16-way splitter cable (provided). The splitter cable consists of 16 BNC sockets numbered 1-16, connected to a 26-way D connector. To connect a video input, connect the Composite/S-Video Luma and Chroma as indicated in the table below. Video Pass-throughBy connecting a second BNC16 Input Cable (available from EMS) to the second XtremeRGB-Ex8 connector it is possible to daisy-chain the video signals to another device. In this case the video will normally be terminated on the downstream device; therefore, the inbuilt terminations on the XtremeRGB-Ex8 should be disabled by removing the on-board links. Installing Multiple CardsUp to 16 cards can be installed in a system providing a maximum of 128 capture channels. Software Included
Streaming SupportDirectShow drivers for WDM Streaming driver supports the following applications, to encode, record and/or stream (Broadcast) video over networks or the Internet:
Specifications
For more information, please download or view datasheet. Find Similar Products by Category |