PCIexpress9

Tel: +44 (0) 116 2775730

Home

Products

Downloads

Support

Resellers

Shipping/Returns

About Us

Contact Us

Click to enlarge

RRP:
Price:: Contact Us
SKU:
Vendor:
Brand:
Condition:
Weight:
Rating:: ()
Availability:
Shipping:
Current Stock:
Gift Wrapping:

Product Description

PCI-Express9 Backplane

Switch Fabric with 192GB/s peak system bandwidth

9 x PCI - Express Slots
1 x SBC PICMG Slot

Daisy chain multiple backplanes to provide up to 25 PCIe slots

Additional Features:

Nine slot PCIe backplane. 8 x 4 lane slots plus 1 x 8 lane slot

All slots implemented as x 16 physical connectors so any width PCIe card can be accommodated

1 x PICMG 1.3 SBC slot

ATX compatible mounting holes

Use as a PCIe expansion backplane for a standard PC using the S-Link and H-Link cards

Compatible with a standard 4U IPC chassis

S-Link and H-Link Cards

The S-Link can be used instead of a PICMG 1.3 SBC to configure the Express 9 as an expansion backplane from a standard PC or from other Express 9 backplanes by connecting to a H-Link card.

Connecting the Express9 Backplane to a Host Machine

Note: The host PC requires a PCIe x8 or x16 lane (physical) slot for installing the H-Link card.

The HOST machine below can be your standard desktop PC and PCIe slots expanded further by using the PCIexpress9

Connection Diagram

Connecting Using One Express9 as a Standard PC (SBC installed) and One Expansion Chassis

System provides up to 17 PCIe slots

Connecting Using One Express9 as a Standard PC (SBC installed) and Multiple Expansion Chassis

Express9 connected to two chassis

System provides up to 25 PCIe slots

Backplane layout

Express 9 board layout

PCI-Express9 Product List

Express9 backplane		9 slot PCI express backplane providing 8 x 4 lane slots and 1 x 8 lane slot.
SBC1		PICMG1.3 Core2 Duo/Quad SBC with VGA, dual Gigabit LAN, SATA RAID USB2.0 and 16-bit GPIO.
S-Link		The S-Link card is a PICMG 1.3 PCIe expansion receiver card installed into the SBC slot located on the Express9 backplane. It is connected to the H-Link card using the Ex-Cable.
H-Link		The H-Link card is a host link adapter which is installed on the host machines motherboard or an Express9. It is connected to the S-Link card using the Ex-Cable.
Ex-cable		The Ex-cable is a 0.75M expansion cable used to connect the Express9 back plane to the host machine via the Ex-link and H-link cards.

Specifications:

Express9
Max Power (without SBC1)	26W
Power Requirements	Max current at +3.3V - 6A Max current at +12V – 0.5A Max current at +5V – 0.1A

Form Factor	PICMG1.3 Host SBC interface 1 x PCIe (x8) expansion slot 8 x PCIe (x4) expansion slots

ATX PSU	4 x 24 pin power connectors
SATA Ports	2 x ports via PICMG1.3 interface
USB Ports	2 x ports via PICMG1.3 interface
S-Link
Max Power	5W
Power Requirements	Max current at +3.3V – 0.1A Max current at +12V – 0.3A Max current at +5V – 0.1A

Form Factor	PICMG1.3
	PCIe x 8 expansion interface
H-Link
Max Power	5W
Power Requirements	Max current at +3.3V – 0.1A Max current at +12V – 0.3A

Form Factor	PCIe x 8
Environment:
Express9/S-Link/H-Link/Ex-cable
Operating Temperature	0 to 35 deg C
Storage Temperature	-20 to 70 degC
Relative Humidity	5% to 90% non-condensing
Warranty	3 years

SBC1 Specification

Features	Compatible with the Express9 backplane PICMG1.3 Core Duo/Quad Dual Ethernet supported Dimensions 338mm x 122mm

Chipset	Intel Q35 and ICH9DO
System Memory	1GB RAM (2GB optional)
I/O Interface	1 x TPM connector 6 x SATA ports with 300MB/s transfer rate supports RAID 0,1, 5 and 10 2 x RS232 serial ports 4 x USB 2.0 ports 16-bit Digital I/O interface 1 x IrDA port
Operating Temperature	0 to 60 degC

For details on how to purchase these products please contact us

For more information, please download or view datasheet.

Find Similar Products by Category

Systems/Backplanes