The
Vigilant-SQ provides all the features of the current Vigilant range but
it also includes four high performance video overlay processors.
The Vigilant-SQ provides one overlay processor per display channel
combined with 256Mb of overlay memory supporting 16 overlay
windows and tripple buffering for each output channel. For systems
that require more than four displays up to ten Vigilant-SQ cards
can be used with the Avant-SQ16 providing support for up to
forty displays and with the ability to position and size video
overlay windows anywhere on the display wall.
The
Vigilant-SQ is supplied with the EMS Wall
Control software which provides full intuitive control of
the video overlay windows.
|
|
- 4-Port
PCI Graphics adapter
- 4-Savage4
GPU's each with 16Mb frame buffers. (Total of 64Mb)
- 4-SIP
video processors each with 64Mb frame buffers. (Total
of 256Mb)
- 4-Analog
VGA outputs up to 1600 x 1200
- 4-DVI
outputs up to 1280 x 1024
- Support
for 1400 x 1050 resolution
- High
speed 5Gb/s SIP digital video input port compatible
with the Avant-SQ16
- Supports
up to 128 video overlay channels when using 8 x Avant-HQ16
|
Vigilant-SQ
Specification:
| Card
Format |
32bit
33Mhz PCI adapter |
| Card
Size |
105mm
x 295mm Full size |
| Number
of output channels |
4 |
| Max
Analog output resolution per channel |
1600
x 1200 x 75Hz or 2048 x 1536 x 35Hz |
| Max
DVI output resolution per channel |
1280
x 1024 x 75Hz or 2048 x 1536 x 30Hz |
| Max
No of overlay windows |
16
per output channel (64 windows per card) |
| Overlay
frame buffer resolution |
720
x 576 x 4 |
| Digital
SIP input bus speed |
5Gb/s |
| Max
No of digital video channels |
128 |
| Video
window update rate |
Real
time 25/30 frames per sec (PAL/NTSC) |
| Max
No of cards per system |
Up
to 10 cards (40 display channels) |
| Power
consumption |
25
watts |
| Power
requirements |
+5V
@ 2.5A, +3.3V @ 5A |
| Operating
temperature |
0
to 35 Deg C ambient |
| Storage
temperature |
-20
to +70 Deg C |
| Relative
humidity |
5%
to 90% non-condensing |
Vigi
Control
- EMS
VigiControl software enables you to configure your multi-screen
display, launch video overlays and create a wall layout configuration,
it is possible to save layouts and recall them for future
use.
- Vigi
Control presents a representational window of the entire display
wall showing position and size of video overlay windows, RGB
windows (if used in conjunction with the
PhynxRGB product), control dialogs for Vx
Switch and any standard application window.
- It
is possible to operate VigiControl on a remote PC via a network
connection.
|
Information
Download
