|
Untitled Document
PCI-Express9 Backplane
Switch Fabric with 100GB/s peak system bandwidth
9 x PCI - Express Slots
1 x SBC PICMG Slot
Daisy chain multiple backplanes to provide up to 25 PCIe slots
|
 |
Additional Features:
- Nine slot PCIe backplane. 8 x 4 lane slots plus 1 x 8 lane slot
- All slots implemented as x 16 physical connectors so any width PCIe card can be accommodated
- 1 x PICMG 1.3 SBC slot
- ATX compatible mounting holes
- Use as a PCIe expansion backplane for a standard PC using the S-Link and H-Link cards
- Compatible with a standard 4U IPC chassis
S-Link and H-Link Cards
The S-Link can be used instead of a PICMG 1.3 SBC to configure the Express 9 as an expansion backplane from a standard PC or from other Express 9 backplanes by connecting to a H-Link card.
Connecting the Express9 Backplane to a Host Machine
Note: The host PC requires a PCIe x8 or x16 lane (physical) slot for installing the H-Link card.
Connecting Using One Express9 as a Standard PC (SBC installed) and One Expansion Chassis
System provides up to 17 PCIe slots
Connecting Using One Express9 as a Standard PC (SBC installed) and Multiple Expansion Chassis
System provides up to 25 PCIe slots
Backplane layout
PCI-Express9 Product List
| Express9 backplane |
|
9 slot PCI express backplane providing 8 x 4 lane slots and 1 x 8 lane slot.
|
| SBC1 |
|
PICMG1.3 Core2 Duo/Quad SBC with VGA, dual Gigabit LAN, SATA RAID USB2.0 and 16-bit GPIO. |
| S-Link |
|
The S-Link card is a PICMG 1.3 PCIe expansion receiver card installed into the SBC slot located on the Express9 backplane. It is connected to the H-Link card using the Ex-Cable.
|
| H-Link |
|
The H-Link card is a host link adapter which is installed on the host machines motherboard or an Express9. It is connected to the S-Link card using the Ex-Cable.
|
| Ex-cable |
|
The Ex-cable is a 0.75M expansion cable used to connect the Express9 back plane to the host machine via the Ex-link and H-link cards.
|
Specifications:
Express9
|
|
| Max Power (without SBC1) |
26W |
| Power Requirements |
Max current at +3.3V - 6A
Max current at +12V – 0.5A
Max current at +5V – 0.1A |
| |
| Form Factor |
PICMG1.3 Host SBC interface
1 x PCIe (x8) expansion slot
8 x PCIe (x4) expansion slots |
| |
| ATX PSU |
4 x 24 pin power connectors |
| SATA Ports |
2 x ports via PICMG1.3 interface |
| USB Ports |
2 x ports via PICMG1.3 interface |
S-Link
|
|
| Max Power |
5W |
| Power Requirements |
Max current at +3.3V – 0.1A
Max current at +12V – 0.3A
Max current at +5V – 0.1A |
| |
| Form Factor |
PICMG1.3 |
| |
PCIe x 8 expansion interface |
H-Link
|
|
| Max Power |
5W |
| Power Requirements |
Max current at +3.3V – 0.1A
Max current at +12V – 0.3A |
| |
| Form Factor |
PCIe x 8 |
|
Environment:
|
| Express9/S-Link/H-Link/Ex-cable |
| Operating Temperature |
0 to 35 deg C |
| Storage Temperature |
-20 to 70 degC |
| Relative Humidity |
5% to 90% non-condensing |
| Warranty |
3 years |
| |
| SBC1 Specification |
| |
|
| Features |
Compatible with the Express9 backplane
PICMG1.3 Core Duo/Quad
Dual Ethernet supported
Dimensions 338mm x 122mm |
| |
|
| Chipset |
Intel Q35 and ICH9DO |
| System Memory |
1GB RAM (2GB optional) |
| I/O Interface |
1 x TPM connector
6 x SATA ports with 300MB/s transfer rate supports RAID 0,1, 5 and 10
2 x RS232 serial ports
4 x USB 2.0 ports
16-bit Digital I/O interface
1 x IrDA port |
| Operating Temperature |
0 to 60 degC |
For details on how to purchase these products please contact us
|
Information
Download
